{
	"manufacturer": "Sharp",
	"manufacturerId": "0x010b",
	"label": "DN3G6JA069",
	"description": "Multi Sensor",
	"devices": [
		{
			"productType": "0x4761",
			"productId": "0x0069",
			"zwaveAllianceId": 2852
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Enable Switch of Multilevel Sensor Report",
			"description": "Configure arbitrarily to send which sensor values. the sensor values can be selected from humidity, luminance, and temperature",
			"valueSize": 1,
			"defaultValue": 7,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Humidity disable, luminance disable, temperature disable",
					"value": 0
				},
				{
					"label": "Humidity disable, luminance disable, temperature enable",
					"value": 1
				},
				{
					"label": "Humidity disable, luminance enable, temperature disable",
					"value": 2
				},
				{
					"label": "Humidity disable, luminance enable, temperature enable",
					"value": 3
				},
				{
					"label": "Humidity enable, luminance disable, temperature disable",
					"value": 4
				},
				{
					"label": "Humidity enable, luminance disable, temperature enable",
					"value": 5
				},
				{
					"label": "Humidity enable, luminance enable, temperature disable",
					"value": 6
				},
				{
					"label": "Humidity enable, luminance enable, temperature enable",
					"value": 7
				}
			]
		},
		{
			"#": "2",
			"label": "Enable Switch of Alarm Notification Report",
			"description": "Configure to send which the sensor values arbitrarily. the sensor values can be selected from human detect and open/close",
			"valueSize": 1,
			"defaultValue": 3,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Human detect disable, open/close disable",
					"value": 0
				},
				{
					"label": "Human detect disable, open/close enable",
					"value": 1
				},
				{
					"label": "Human detect enable, open/close disable",
					"value": 2
				},
				{
					"label": "Human detect enable, open/close enable",
					"value": 3
				}
			]
		},
		{
			"#": "3",
			"label": "Select Switch of Luminance Sensor Scale",
			"description": "Configure the luminance sensor scale to either percentage value or lux",
			"valueSize": 1,
			"unit": "%",
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Percentage value",
					"value": 0
				},
				{
					"label": "Lux",
					"value": 1
				}
			]
		},
		{
			"#": "4",
			"label": "Set Interval for Multilevel Sensor",
			"description": "Configure the sending interval time of the sensor value which is selected by configuration parameter number 1. \"0\" means especially synchronizing with wake up interval",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 0,
			"options": [
				{
					"label": "Synchronizing with wake up interval",
					"value": 0
				}
			]
		}
	],
	"metadata": {
		"inclusion": "Insert a CR123A, and LED blinks. \nSet the controller to the status for “Add”.\nPress the button over 3 seconds and release.\nAbout 30 second later, LED turns off when “Add” is completed.",
		"exclusion": "Set the controller to the status for “Remove”.\nPress the button over 3 seconds and release.\nLED blinks when “Remove” is completed.",
		"reset": "Press the button over 10 seconds and release",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2852/UsersGuide%20DN3G6JA069%20rev1.pdf"
	}
}