{
	"manufacturer": "Everspring",
	"manufacturerId": "0x0060",
	"label": "AN-196",
	"description": "Dual Relay In-Wall Module",
	"devices": [
		{
			"productType": "0x0004",
			"productId": "0x000e",
			"zwaveAllianceId": [3633, 4640]
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 5,
			"isLifeline": true
		},
		"2": {
			"label": "On/Off Control",
			"maxNodes": 5
		},
		"3": {
			"label": "On/Off Control",
			"maxNodes": 5
		}
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Switch 1 Type",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Momentary",
					"value": 0
				},
				{
					"label": "Toggle",
					"value": 1
				}
			]
		},
		{
			"#": "2",
			"label": "Switch 2 Type",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Momentary",
					"value": 0
				},
				{
					"label": "Toggle",
					"value": 1
				}
			]
		},
		{
			"#": "3",
			"label": "Auto Off Time: Relay 1",
			"valueSize": 1,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 127,
			"defaultValue": 0,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "4",
			"label": "Auto Off Time: Relay 2",
			"valueSize": 1,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 127,
			"defaultValue": 0,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "5",
			"$import": "~/templates/master_template.json#state_after_power_failure_off_prev",
			"label": "State After Power Failure: Relay 1"
		},
		{
			"#": "6",
			"$import": "~/templates/master_template.json#state_after_power_failure_off_prev",
			"label": "State After Power Failure: Relay 2"
		}
	],
	"metadata": {
		"inclusion": "1.Put the Z-Wave Controller into inclusion mode.\n2. Press the link key three times within 1.5 seconds to put the unit into inclusion mode.",
		"exclusion": "1. Put the Z-Wave Controller into exclusion mode.\n2. Press the link key three times within 1.5 seconds to put the unit into exclusion mode.",
		"reset": "1. Press the link key three times within 1.5 seconds to put the unit into exclusion mode.\n2. Within 1 second of step 1, press link key again and hold until LED is off (about 5 seconds).\n3. Node ID is excluded. The device reverts to factory default state and will be in auto-inclusion mode for 4 minutes.",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4640/AN-196%20user%20manual.pdf"
	}
}