{
	"manufacturer": "Honeywell",
	"manufacturerId": "0x0039",
	"label": "39363 / 39470 / ZW4203",
	"description": "Plug-In Outdoor Switch V2, 500S",
	"devices": [
		{
			"productType": "0x4f50",
			"productId": "0x3034",
			"zwaveAllianceId": 3476
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 5,
			"isLifeline": true
		},
		"2": {
			"label": "Local Loads",
			"maxNodes": 5
		},
		"3": {
			"label": "Double Tap",
			"maxNodes": 5,
			"isLifeline": true
		}
	},
	"paramInformation": [
		{
			"#": "3",
			"label": "LED Light",
			"description": "LED status when device on or off.",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "LED on when load is off",
					"value": 0
				},
				{
					"label": "LED on when light is turned on",
					"value": 1
				},
				{
					"label": "LED always off",
					"value": 2
				}
			]
		},
		{
			"#": "19",
			"label": "Alternate Exclusion",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Press the button once to exclude",
					"value": 0
				},
				{
					"label": "Press the button twice and hold on the third press",
					"value": 1
				}
			]
		}
	],
	"compat": {
		"mapBasicSet": "event"
	},
	"metadata": {
		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network. \n\n2. Once the controller is ready to add your device, press and the manual/program button on the smart switch.\n\nIf prompted by the controller to enter the S2 security code, refer to the QR code/security number on the box or the QR code label on the product. Enter the 5-digit code",
		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.\n\n2. Once the controller is ready to remove your device, press the manual/program button on the smart switch to remove it from the network",
		"reset": "1. If plugged in, unplug the device from the receptacle.\n\n2. Press and hold the manual/program button, plug the device in, and continue to hold for at least 3 seconds.\n\nNote: This should only be used in the event your network’s primary controller is missing or otherwise inoperable",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3476/39363-QSG-1.pdf"
	}
}