{
	"manufacturer": "Honeywell",
	"manufacturerId": "0x0039",
	"label": "39337 / 39444 / ZW4103",
	"description": "Plug-In 1-Outlet Switch, 500S",
	"devices": [
		{
			"productType": "0x5052",
			"productId": "0x3038",
			"zwaveAllianceId": [2686, 3744]
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "3",
			"label": "LED Indicator",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "LED on when device is off",
					"value": 0
				},
				{
					"label": "LED on when device is on",
					"value": 1
				},
				{
					"label": "Always off",
					"value": 2
				}
			]
		}
	],
	"metadata": {
		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include the device to the Z-Wave network. \n2. Once the controller is ready to include your smart switch, single press and release the manual/program button on the smart dimmer to include it in the network.\n3. Once your controller has confirmed that the smart switch has been included, refresh the Z-Wave network to optimize performance.",
		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network. \n2. Once the controller is ready to exclude your device, press and release the manual/program button on the smart switch to exclude it from the network.",
		"reset": "1. If plugged in, unplug the device from the receptacle.\n2. Press and hold the top button, plug the device in, and continue to hold for at least 3 seconds.\nNote: This should only be used in the event your network’s\nprimary controller is missing or otherwise inoperable",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2686/39337-HQSG_v1.pdf"
	}
}