{
	"manufacturer": "Honeywell",
	"manufacturerId": "0x0039",
	"label": "39336 / 39443 / ZW3104",
	"description": "Plug-In 1-Outlet Dimmer, 500S",
	"devices": [
		{
			"productType": "0x5044",
			"productId": "0x3038",
			"zwaveAllianceId": [2681, 3743]
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 5,
			"isLifeline": true
		},
		"2": {
			"label": "Local Load",
			"maxNodes": 5
		},
		"3": {
			"label": "Double Tap",
			"maxNodes": 5,
			"isLifeline": true
		}
	},
	"paramInformation": [
		{
			"#": "3",
			"label": "LED Light",
			"description": "LED status when device on or off.",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "LED on when load is off",
					"value": 0
				},
				{
					"label": "LED on when light is turned on",
					"value": 1
				},
				{
					"label": "LED always off",
					"value": 2
				}
			]
		},
		{
			"#": "6",
			"label": "Dim Up/down Rate",
			"description": "Number of steps or levels",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Dim up/down quickly",
					"value": 0
				},
				{
					"label": "Dim up/down slowly",
					"value": 1
				}
			]
		},
		{
			"#": "7",
			"label": "Dim Rate Steps (Z-Wave Command)",
			"description": "Number of steps or levels",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 99,
			"defaultValue": 1
		},
		{
			"#": "8",
			"label": "Dim Rate Timing (Z-Wave)",
			"description": "Timing of steps or levels",
			"valueSize": 2,
			"unit": "10ms",
			"minValue": 1,
			"maxValue": 255,
			"defaultValue": 3
		},
		{
			"#": "9",
			"label": "Dim Rate Steps (Manual)",
			"description": "Number of steps or levels",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 99,
			"defaultValue": 1
		},
		{
			"#": "10",
			"label": "Dim Rate Timing (Manual)",
			"description": "Timing of steps",
			"valueSize": 2,
			"unit": "10ms",
			"minValue": 1,
			"maxValue": 255,
			"defaultValue": 3
		},
		{
			"#": "11",
			"label": "Dim Rate Steps (All-On/All-Off)",
			"description": "Number of steps or levels",
			"valueSize": 1,
			"unit": "10ms",
			"minValue": 1,
			"maxValue": 99,
			"defaultValue": 1
		},
		{
			"#": "12",
			"label": "Dim Rate Timing (All-On/All-Off)",
			"description": "Timing of steps or levels",
			"valueSize": 2,
			"unit": "10ms",
			"minValue": 1,
			"maxValue": 255,
			"defaultValue": 3
		},
		{
			"#": "16",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Switch Mode"
		},
		{
			"#": "20",
			"label": "Minimum Dim Level",
			"description": "Number of Steps",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 99,
			"defaultValue": 1
		}
	],
	"compat": {
		"mapBasicSet": "event"
	},
	"metadata": {
		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add\nthe smart dimmer to the Z-Wave network.\n2. Once the controller is ready to add your smart dimmer, single\npress and release the manual/program button on the smart\ndimmer to add it in the network.\nPlease reference the controller/gateway’s manual for instructions",
		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to\nremove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and\nrelease the manual/program button on the smart dimmer to\nremove it from the network",
		"reset": "To return your dimmer to factory defaults:\n1. If plugged in, unplug the device from the receptacle.\n2. Press and hold the top button, plug the device in, and continue to hold for at least 3 seconds.\nNote: This should only be used in the event your networks’ primary\ncontroller is missing or otherwise inoperable",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3743/39443-HQSG_v3.pdf"
	}
}