{
	"manufacturer": "HomeSeer Technologies",
	"manufacturerId": "0x000c",
	"label": "HS-WX300",
	"description": "Wall Dimmer & Switch",
	"devices": [
		{
			"productType": "0x4447",
			"productId": "0x4036",
			"zwaveAllianceId": 4176
		},
		{
			"productType": "0x4447",
			"productId": "0x4037"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 5,
			"isLifeline": true
		},
		"2": {
			"label": "Group 2",
			"maxNodes": 5
		}
	},
	"paramInformation": [
		{
			"#": "3",
			"$import": "templates/homeseer_template.json#led_indicator_inverted",
			"label": "Bottom LED Operation"
		},
		{
			"#": "4",
			"$import": "~/templates/master_template.json#orientation"
		},
		{
			"#": "5",
			"$import": "templates/homeseer_template.json#dimming_threshold"
		},
		{
			"#": "6",
			"$import": "templates/homeseer_template.json#scene_control"
		},
		{
			"#": "11",
			"$import": "templates/homeseer_template.json#ramp_rate",
			"label": "Ramp Rate (Z-Wave)"
		},
		{
			"#": "12",
			"$import": "templates/homeseer_template.json#ramp_rate",
			"label": "Ramp Rate (Manual)"
		},
		{
			"#": "13",
			"$import": "templates/homeseer_template.json#status_mode",
			"label": "Status Mode"
		},
		{
			"#": "14",
			"$import": "templates/homeseer_template.json#led_colors",
			"label": "Load Status LED Color",
			"description": "Set the LED color when displaying load status"
		},
		{
			"#": "21",
			"$import": "templates/homeseer_template.json#status_mode_choices",
			"label": "Status LED 1 Color"
		},
		{
			"#": "22",
			"$import": "templates/homeseer_template.json#status_mode_choices",
			"label": "Status LED 2 Color"
		},
		{
			"#": "23",
			"$import": "templates/homeseer_template.json#status_mode_choices",
			"label": "Status LED 3 Color"
		},
		{
			"#": "24",
			"$import": "templates/homeseer_template.json#status_mode_choices",
			"label": "Status LED 4 Color"
		},
		{
			"#": "25",
			"$import": "templates/homeseer_template.json#status_mode_choices",
			"label": "Status LED 5 Color"
		},
		{
			"#": "26",
			"$import": "templates/homeseer_template.json#status_mode_choices",
			"label": "Status LED 6 Color"
		},
		{
			"#": "27",
			"$import": "templates/homeseer_template.json#status_mode_choices",
			"label": "Status LED 7 Color"
		},
		{
			"#": "30",
			"$import": "templates/homeseer_template.json#blink_frequency",
			"label": "Custom Status Blink Frequency"
		},
		{
			"#": "31[0x01]",
			"$import": "templates/homeseer_template.json#led_blink_status",
			"label": "LED 1 Blink Status"
		},
		{
			"#": "31[0x02]",
			"$import": "templates/homeseer_template.json#led_blink_status",
			"label": "LED 2 Blink Status"
		},
		{
			"#": "31[0x04]",
			"$import": "templates/homeseer_template.json#led_blink_status",
			"label": "LED 3 Blink Status"
		},
		{
			"#": "31[0x08]",
			"$import": "templates/homeseer_template.json#led_blink_status",
			"label": "LED 4 Blink Status"
		},
		{
			"#": "31[0x10]",
			"$import": "templates/homeseer_template.json#led_blink_status",
			"label": "LED 5 Blink Status"
		},
		{
			"#": "31[0x20]",
			"$import": "templates/homeseer_template.json#led_blink_status",
			"label": "LED 6 Blink Status"
		},
		{
			"#": "31[0x40]",
			"$import": "templates/homeseer_template.json#led_blink_status",
			"label": "LED 7 Blink Status"
		},
		{
			"#": "32",
			"label": "Wire Mode",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "3 wire mode (Neutral, line & load)",
					"value": 0
				},
				{
					"label": "2 wire mode (Line & load)",
					"value": 1
				}
			]
		},
		{
			"#": "33",
			"$if": "firmwareVersion >= 1.13",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Indicate Operation Mode On Startup"
		},
		{
			"#": "34",
			"$if": "firmwareVersion >= 1.13",
			"label": "Relative LED Indicator Brightness",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 6,
			"defaultValue": 3
		},
		{
			"#": "35",
			"$if": "firmwareVersion >= 1.13",
			"label": "Paddle Behavior (Switch Mode)",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Top paddle turns on; Bottom paddle turns off",
					"value": 0
				},
				{
					"label": "Both paddles toggle",
					"value": 1
				}
			]
		},
		{
			"#": "36",
			"$if": "firmwareVersion >= 1.13",
			"label": "Default Brightness (Manual Control)",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 99,
			"defaultValue": 0,
			"options": [
				{
					"label": "Last non-zero brightness",
					"value": 0
				}
			]
		},
		{
			"#": "37",
			"$if": "firmwareVersion >= 1.13",
			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
			"label": "Control Load with Paddle",
			"defaultValue": 0
		}
	],
	"metadata": {
		"inclusion": "1. Put your Z-Wave controller into inclusion (or exclusion) mode. Consult your controller’s manual if you’re unsure how to do this. \n2. In rapid succession, tap the bottom paddle 2 times, then press & hold the bottom paddle for 3 seconds (tap-tap-press & hold). This will initiate the inclusion (or exclusion) process. \nNote: The switch will default to dimmer mode after Z-Wave exclusion.",
		"exclusion": "1. Put your Z-Wave controller into inclusion (or exclusion) mode. Consult your controller’s manual if you’re unsure how to do this. \n2. In rapid succession, tap the bottom paddle 2 times, then press & hold the bottom paddle for 3 seconds (tap-tap-press & hold). This will initiate the inclusion (or exclusion) process. \nNote: The switch will default to dimmer mode after Z-Wave exclusion.",
		"reset": "To be used only in the event that the network primary controller is lost or otherwise inoperable.\n\n1. In rapid succession, tap the top paddle 3 times, then tap the bottom paddle 3 times. If all LEDs flash white 5 times, factory reset was successful. If not, repeat this procedure.\nNote: As this must be done very quickly, we recommend using 2 fingers for this operation; one on each paddle!\nNote: The switch will default to 3-wire mode and dimmer mode after factory reset",
		"manual": "https://docs.homeseer.com/products/hs-wx300-r2-user-guide"
	}
}