{
	"manufacturer": "HomeSeer Technologies",
	"manufacturerId": "0x000c",
	"label": "HS-PS100",
	"description": "Z-Wave Presence Sensor",
	"devices": [
		{
			"productType": "0x0204",
			"productId": "0x0002"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 1,
			"isLifeline": true
		},
		"2": {
			"label": "Basic Set",
			"maxNodes": 5
		}
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Off Delay After Motion",
			"valueSize": 4,
			"unit": "seconds",
			"minValue": 10,
			"maxValue": 3600,
			"defaultValue": 10
		},
		{
			"#": "2",
			"label": "Distance Report Interval",
			"valueSize": 4,
			"unit": "seconds",
			"minValue": 2,
			"maxValue": 600,
			"defaultValue": 10
		},
		{
			"#": "3",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Bluetooth",
			"description": "After changing this setting, the unit will need to be power cycled before it will take effect."
		},
		{
			"#": "4",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Motion LED",
			"description": "Enable / Disable the LED flash when motion is sensed (red) and times out (green).",
			"defaultValue": 1
		},
		{
			"#": "6",
			"$import": "templates/homeseer_template.json#range_sensitivity",
			"label": "Range 0-75cm (0-2.4ft) Sensitivity",
			"defaultValue": 50
		},
		{
			"#": "7",
			"$import": "templates/homeseer_template.json#range_sensitivity",
			"label": "Range 75-150cm (2.4-4.9ft) Sensitivity",
			"defaultValue": 50
		},
		{
			"#": "8",
			"$import": "templates/homeseer_template.json#range_sensitivity",
			"label": "Range 150-225cm (4.9-7.3ft) Sensitivity",
			"defaultValue": 50
		},
		{
			"#": "9",
			"$import": "templates/homeseer_template.json#range_sensitivity",
			"label": "Range 225-300cm (7.3-9.8ft) Sensitivity",
			"defaultValue": 50
		},
		{
			"#": "10",
			"$import": "templates/homeseer_template.json#range_sensitivity",
			"label": "Range 300-375cm (9.8-12.3ft) Sensitivity",
			"defaultValue": 90
		},
		{
			"#": "11",
			"$import": "templates/homeseer_template.json#range_sensitivity",
			"label": "Range 375-450cm (12.3-14.7ft) Sensitivity",
			"defaultValue": 90
		},
		{
			"#": "12",
			"$import": "templates/homeseer_template.json#range_sensitivity",
			"label": "Range 450-525cm (14.7-17.2ft) Sensitivity",
			"defaultValue": 90
		},
		{
			"#": "13",
			"$import": "templates/homeseer_template.json#range_sensitivity",
			"label": "Range 525-600cm (17.2-19.6ft) Sensitivity",
			"defaultValue": 90
		}
	],
	"metadata": {
		"inclusion": "1) Set the main controller in inclusion mode (see the controller’s manual).\n2) Press and release the sensor’s Z-Wave network button.",
		"exclusion": "1) Set the main controller in exclusion mode (see the controller’s manual).\n2) Press and release the sensor’s Z-Wave network button.",
		"reset": "1) Power on the device\n2) Press and hold the Z-Wave network button for 30 seconds.",
		"manual": "https://docs.homeseer.com/products/ps100-g8-user-guide"
	}
}