{
	"manufacturer": "HomeSeer Technologies",
	"manufacturerId": "0x000c",
	"label": "HS-FLS100-G2",
	"description": "Floodlight Sensor",
	"devices": [
		{
			"productType": "0x0201",
			"productId": "0x000c",
			"zwaveAllianceId": 3984
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"$import": "templates/homeseer_template.json#pir_trigger_off"
		},
		{
			"#": "2",
			"$import": "templates/homeseer_template.json#lux_trigger_threshold"
		},
		{
			"#": "3",
			"$import": "templates/homeseer_template.json#multilevel_sensor_interval"
		},
		{
			"#": "4",
			"$import": "templates/homeseer_template.json#enable_pir_trigger_alerts"
		},
		{
			"#": "5",
			"label": "Load Control Mode",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Z-Wave only",
					"value": 0
				},
				{
					"label": "Z-Wave and sensors",
					"value": 1
				}
			]
		},
		{
			"#": "6",
			"label": "Load Control Sensor Mode",
			"description": "Select which sensors control the load when parameter 5 is set to 1",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Lux and motion",
					"value": 0
				},
				{
					"label": "Lux only",
					"value": 1
				}
			]
		},
		{
			"#": "7",
			"label": "Temperature Calibration",
			"valueSize": 1,
			"unit": "0.1 °C",
			"minValue": -100,
			"maxValue": 100,
			"defaultValue": 0
		},
		{
			"#": "8",
			"label": "PIR Sensitivity",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Low - Approximately 6m",
					"value": 0
				},
				{
					"label": "Medium - Approximately 10m",
					"value": 1
				},
				{
					"label": "High - Approximately 20m",
					"value": 2
				}
			]
		}
	],
	"metadata": {
		"inclusion": "1. Put the Z-Wave controller into inclusion mode.\n2. Press the Link button 3 times within 1.5 seconds to put the unit into inclusion mode.",
		"exclusion": "1. Put the Z-Wave Controller into exclusion mode. \n2. Press the Link button 3 times within 1.5 seconds to put the unit into exclusion mode",
		"reset": "The product reset is to operate only when the primary controller is missing or inoperable. Press the Link button 3 times within 1.5 seconds to put the unit into exclusion mode.Within 1 second of step 1, press the Link button again and hold until LED is off (about 5 seconds)",
		"manual": "https://docs.homeseer.com/products/hs-fls100-user-guide"
	}
}