24 lines
1.7 KiB
JSON
24 lines
1.7 KiB
JSON
|
{
|
|||
|
|
"manufacturer": "Abode",
|
|||
|
|
"manufacturerId": "0x0400",
|
|||
|
|
"label": "IOT",
|
|||
|
|
"description": "Iota",
|
|||
|
|
"devices": [
|
|||
|
|
{
|
|||
|
|
"productType": "0x0001",
|
|||
|
|
"productId": "0x0001",
|
|||
|
|
"zwaveAllianceId": 3856
|
|||
|
|
}
|
|||
|
|
],
|
|||
|
|
"firmwareVersion": {
|
|||
|
|
"min": "0.0",
|
|||
|
|
"max": "255.255"
|
|||
|
|
},
|
|||
|
|
"metadata": {
|
|||
|
|
"inclusion": "To include a compatible Z-Wave product to iota, simply navigate to the abode mobile or web app, select “add device”, then select “Other Devices”. Your gateway will now be in inclusion mode and able to pick up any Z-Wave devices also placed into inclusion mode per the manufacturer’s instructions. You may also enable Z-Wave Exclusion mode while in inclusion mode to avoid detecting any Z-Wave devices",
|
|||
|
|
"exclusion": "You may also enable Z-Wave Exclusion mode while in pairing mode to avoid detecting any Z-Wave devices.\nThe exclusion only takes the step of setting the device into exclusion mode",
|
|||
|
|
"reset": "Use this procedure only when the network primary controller is missing or otherwise inoperable. To factory reset iota follow the steps below: \nStep 1. Disconnect the AC adaptor, slide battery switch to OFF. \nStep 2. Press and Hold the right side hidden button located behind the white fabric below the camera lens.\nStep 3. Continue Holding and connect the AC adaptor to the Control Panel. \nStep 4. Keep holding the reset button for a full minute then release. After ~30 seconds, the Iota will restart. (you will see the LEDs flash and some beeps) \nStep 5. Wait for 1 full minute for the reset and re-connection to complete.",
|
|||
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3856/Get%20to%20know%20iota_050420.pdf"
|
|||
|
|
}
|
|||
|
|
}
|