zwave-js/.config-db/devices/0x017f/wink_motion_sensor.json

{
	"manufacturer": "Wink Inc.",
	"manufacturerId": "0x017f",
	"label": "Motion Sensor",
	"description": "Motion Sensor",
	"devices": [
		{
			"productType": "0x0101",
			"productId": "0x0001",
			"zwaveAllianceId": 2482
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Sensitivity Level",
			"valueSize": 1,
			"minValue": 8,
			"maxValue": 255,
			"defaultValue": 12,
			"unsigned": true
		},
		{
			"#": "2",
			"label": "Motion Cleared Time Delay",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 5,
			"maxValue": 600,
			"defaultValue": 30
		},
		{
			"#": "3",
			"label": "Basic Set Level",
			"description": "Allowable range: 0-99, 255",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 255,
			"unsigned": true,
			"options": [
				{
					"label": "Off",
					"value": 0
				},
				{
					"label": "On",
					"value": 255
				}
			]
		},
		{
			"#": "4",
			"label": "Enable/Disable Motion Detection",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disabled",
					"value": 0
				},
				{
					"label": "Enabled",
					"value": 1
				}
			]
		},
		{
			"#": "5",
			"label": "Group 2 Ambient Light Threshold",
			"valueSize": 2,
			"unit": "Lux",
			"minValue": 5,
			"maxValue": 1000,
			"defaultValue": 100
		},
		{
			"#": "6",
			"label": "Retrigger Interval",
			"valueSize": 1,
			"unit": "seconds",
			"minValue": 1,
			"maxValue": 8,
			"defaultValue": 8
		},
		{
			"#": "7",
			"label": "Light Sensing Interval",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 60,
			"maxValue": 3600,
			"defaultValue": 180
		},
		{
			"#": "8",
			"label": "Enable/Disable Group 2 Ambient Light Threshold",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disabled",
					"value": 0
				},
				{
					"label": "Enabled",
					"value": 1
				}
			]
		},
		{
			"#": "9",
			"label": "Ambient Light Sensitivity Level",
			"valueSize": 1,
			"unit": "Lux",
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 100,
			"unsigned": true
		},
		{
			"#": "10",
			"label": "Enable/Disable LED Indicator",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disabled",
					"value": 0
				},
				{
					"label": "Enabled",
					"value": 1
				}
			]
		}
	],
	"metadata": {
		"inclusion": "Follow the instructions for your Z-Wave certified Controller to enter inclusion mode.\nWhen prompted by the Controller:\n1. For proper inclusion, bring the Motion Detector within range of your Controller.\n2. Pull the tab on the side of the sensor to power on, or remove then re-install the batteries.\nThe LED indicator will flash five times indicating inclusion",
		"exclusion": "Follow the instructions for your Z-Wave certified Controller to enter exclusion mode. When prompted by the Controller:\n1. Remove the cover of the Motion Detector and be sure it is powered on.\n2. Press the Connect Button on the bottom of the device quickly 3 times in a row.\nThe LED Indicator will flash five times indicating exclusion/disconnection.",
		"reset": "To disconnect from the Z-Wave Network and restore factory default settings:\n1. Remove the cover of the Motion Detector and be sure it is powered on.\n2. Hold the Connect Button for 10 seconds until the LED indicator blinks once, then release the button.\nOnly do this if the controller is disconnected or otherwise unreachable!",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2482/wink-motion-manual.pdf"
	}
}