zwave-js/.config-db/devices/0x010f/fgfs101.json

{
	"manufacturer": "Fibargroup",
	"manufacturerId": "0x010f",
	"label": "FGFS101",
	"description": "Flood Sensor",
	"devices": [
		{
			"productType": "0x0b00",
			"productId": "0x1001"
		},
		{
			"productType": "0x0b01",
			"productId": "0x1002"
		},
		{
			"productType": "0x0b01",
			"productId": "0x1003"
		},
		{
			"productType": "0x0b00",
			"productId": "0x2001"
		},
		{
			"productType": "0x0b01",
			"productId": "0x2002"
		},
		{
			"productType": "0x0b01",
			"productId": "0x2003"
		},
		{
			"productType": "0x0b00",
			"productId": "0x3001"
		},
		{
			"productType": "0x0b01",
			"productId": "0x3002"
		},
		{
			"productType": "0x0b01",
			"productId": "0x3003"
		},
		{
			"productType": "0x0b00",
			"productId": "0x4001"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Flood Alarm",
			"maxNodes": 5
		},
		"2": {
			"label": "Tilt & Tamper Sensors",
			"maxNodes": 5
		},
		"3": {
			"label": "Device Status",
			"maxNodes": 1,
			"isLifeline": true
		}
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Alarm Cancellation Delay",
			"description": "Time alarm still indicated after alarm condition has ceased",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 3600,
			"defaultValue": 0
		},
		{
			"#": "2",
			"$if": "firmwareVersion >= 3.1",
			"label": "Select Alarm Type (Visual/acoustic)",
			"description": "This parameter allows for deactivation visual and acoustic alarm.",
			"valueSize": 1,
			"defaultValue": 3,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Acoustic and visual alarms inactive",
					"value": 0
				},
				{
					"label": "Acoustic alarm inactive, visual alarm active",
					"value": 1
				},
				{
					"label": "Acoustic alarm active, visual alarm inactive",
					"value": 2
				},
				{
					"label": "Acoustic and visual alarms active",
					"value": 3
				}
			]
		},
		{
			"#": "5",
			"label": "Type Alarm Frame Sent to 1st Assoc Group",
			"description": "Type of cmd frame sent in case of flooding",
			"valueSize": 1,
			"defaultValue": 255,
			"unsigned": true,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Alarm water",
					"value": 0
				},
				{
					"label": "Basic Set",
					"value": 255
				}
			]
		},
		{
			"#": "7",
			"label": "Forced Level of Dimming Group 1",
			"description": "Parameter specifying forced level of dimming f. asoc grp 1",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 255,
			"defaultValue": 255,
			"unsigned": true
		},
		{
			"#": "9",
			"label": "Device Off and Alarm Cancellations",
			"description": "Enable/disable device off/alarm cancellation updates to 2nd/3rd assoc groups",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Alarm (Flooding) cancellation inactive",
					"value": 0
				},
				{
					"label": "Alarm (Flooding) cancellation active",
					"value": 1
				}
			]
		},
		{
			"#": "10",
			"$if": "firmwareVersion <= 3.1",
			"label": "Interval Betw. Successive Readings of Temp Sensors",
			"valueSize": 2,
			"minValue": 1,
			"maxValue": 32767,
			"defaultValue": 300
		},
		{
			"#": "10",
			"$if": "firmwareVersion >= 3.2",
			"label": "Temperature Measurement Interval",
			"description": "Seconds between consecutive measurements of battery level/temperature",
			"valueSize": 4,
			"minValue": 1,
			"maxValue": 65535,
			"defaultValue": 300
		},
		{
			"#": "12",
			"$if": "firmwareVersion <= 3.1",
			"label": "Temperature Change Report Threshold",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 1000,
			"defaultValue": 50
		},
		{
			"#": "12",
			"$if": "firmwareVersion >= 3.2",
			"label": "Temperature Measurement Hysteresis",
			"description": "Minimum change in temperature value for report to be sent to controller",
			"valueSize": 2,
			"minValue": 1,
			"maxValue": 1000,
			"defaultValue": 50
		},
		{
			"#": "13",
			"label": "Alarm BROADCAST",
			"description": "Transmit the alarm or control frame in 'broadcast' mode",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Broadcast inactive",
					"value": 0
				},
				{
					"label": "Flood broadcast active, tamper broadcast inactive",
					"value": 1
				},
				{
					"label": "Flood broadcast inactive, tamper broadcast active",
					"value": 2
				},
				{
					"label": "Flood and tamper broadcast mode active",
					"value": 3
				}
			]
		},
		{
			"#": "50",
			"label": "Low Temperature Alarm Threshold",
			"description": "Temperature value below which LED indicator blinks",
			"valueSize": 2,
			"minValue": -10000,
			"maxValue": 10000,
			"defaultValue": 1500
		},
		{
			"#": "51",
			"label": "High Temperature Alarm Threshold",
			"description": "Temperature value above which LED indicator blinks",
			"valueSize": 2,
			"minValue": -10000,
			"maxValue": 10000,
			"defaultValue": 3500
		},
		{
			"#": "61",
			"label": "Low Temperature Alarm Indicator Colour",
			"description": "Default is blue (0x000000FF).",
			"valueSize": 4,
			"minValue": 0,
			"maxValue": 16777215,
			"defaultValue": 255
		},
		{
			"#": "62",
			"label": "High Temperature Alarm Indicator Colour",
			"description": "Default is red (0x00FF0000). 65535 * Red + 256 * Green + Blue",
			"valueSize": 4,
			"minValue": 0,
			"maxValue": 16777215,
			"defaultValue": 16711680
		},
		{
			"#": "63",
			"label": "Visual Temperature Indicator",
			"description": "Enable or disable visual temperature indicator via device's LED",
			"valueSize": 1,
			"defaultValue": 2,
			"allowManualEntry": false,
			"options": [
				{
					"label": "No temperature indication",
					"value": 0
				},
				{
					"label": "Every measurement (Battery)",
					"value": 1
				},
				{
					"label": "Every measurement (Power mode)",
					"value": 2
				}
			]
		},
		{
			"#": "73",
			"label": "Temperature Measurement Compensation",
			"description": "Temperature value to compensate between air temp",
			"valueSize": 2,
			"minValue": -10000,
			"maxValue": 10000,
			"defaultValue": 0
		},
		{
			"#": "74",
			"label": "Alarm Frame for Movement/tamper",
			"description": "Movement/tamper alarm sent to 1st & 4th assoc. group",
			"valueSize": 1,
			"defaultValue": 2,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Tamper alarm inactive",
					"value": 0
				},
				{
					"label": "Button tamper alarm active",
					"value": 1
				},
				{
					"label": "Movement tamper alarm active",
					"value": 2
				},
				{
					"label": "Button and movement tampers alarm active",
					"value": 3
				}
			]
		},
		{
			"#": "75",
			"$if": "firmwareVersion <= 3.1",
			"label": "Visual and Audible Alarms Duration",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 0,
			"unsigned": true
		},
		{
			"#": "75",
			"$if": "firmwareVersion >= 3.2",
			"label": "Alarms Signalization Duration",
			"description": "Turn off alarm after given timeout",
			"valueSize": 4,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 0
		},
		{
			"#": "76",
			"$if": "firmwareVersion <= 3.1",
			"label": "Alarm/basic Retransmission Time When Flooding",
			"description": "Time period after which alarm frames will be retransmitted",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 0,
			"unsigned": true
		},
		{
			"#": "76",
			"$if": "firmwareVersion >= 3.2",
			"label": "Alarm Signalization Reactivation Period",
			"description": "Time period after which an alarm will be turned back on",
			"valueSize": 4,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 0
		},
		{
			"#": "77",
			"label": "Flood Sensor Functionality Turned Off",
			"description": "Allows the internal flood sensor to be turned off.",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Flood sensor on",
					"value": 0
				},
				{
					"label": "Built-In flood sensor turned off",
					"value": 1
				}
			]
		},
		{
			"#": "78",
			"$if": "firmwareVersion >= 3.2",
			"label": "Associations in Z-Wave Network Security Mode",
			"description": "Defines whether commands are sent as secure or non-secure",
			"valueSize": 1,
			"defaultValue": 7,
			"allowManualEntry": false,
			"options": [
				{
					"label": "None of the groups are sent as secure",
					"value": 0
				},
				{
					"label": "2nd group ”Control” sent as secure",
					"value": 1
				},
				{
					"label": "3rd group ”Alarm” sent as secure",
					"value": 2
				},
				{
					"label": "4th group ”Tamper” sent as secure",
					"value": 3
				}
			]
		}
	]
}