zwave-js/.config-db/devices/0x0344/he-tps01.json

{
	"manufacturer": "HELTUN",
	"manufacturerId": "0x0344",
	"label": "HE-TPS01",
	"description": "Touch Panel Switch Uno",
	"devices": [
		{
			"productType": "0x0004",
			"productId": "0x0007"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"$import": "templates/heltun_template.json#frequency_region"
		},
		{
			"#": "3",
			"$import": "templates/heltun_template.json#hw_sw_ver"
		},
		{
			"#": "4",
			"$import": "templates/heltun_template.json#energy_consumption"
		},
		{
			"#": "5",
			"label": "Backlight Brightness Control",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 10,
			"defaultValue": 0
		},
		{
			"#": "6",
			"label": "Touch Button Sensitivity",
			"description": "1 = low sensitivity; 10 = high sensitivity",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 10,
			"defaultValue": 6
		},
		{
			"#": "7",
			"$import": "templates/heltun_template.json#relay_output_mode",
			"label": "Relay 1: Output Mode"
		},
		{
			"#": "12",
			"$import": "templates/heltun_template.json#relay_load_power",
			"label": "Relay 1: Load Power"
		},
		{
			"#": "17",
			"$import": "templates/heltun_template.json#temp_sensor_calibration",
			"label": "Air Temperature Calibration"
		},
		{
			"#": "19",
			"$import": "templates/heltun_template.json#controller_time_correction"
		},
		{
			"#": "21",
			"$import": "templates/heltun_template.json#weekday_override"
		},
		{
			"#": "22",
			"$import": "templates/heltun_template.json#time_override"
		},
		{
			"#": "30",
			"$import": "templates/heltun_template.json#button_backlight_color"
		},
		{
			"#": "31",
			"$import": "templates/heltun_template.json#base_button_backlight_control_source",
			"label": "Button 1: Backlight Control Source"
		},
		{
			"#": "41",
			"$import": "templates/heltun_template.json#external_input_hold_control_mode",
			"label": "Button 1: Hold Control Mode"
		},
		{
			"#": "51",
			"$import": "templates/heltun_template.json#external_input_click_control_mode_6",
			"label": "Button 1: Click Control Mode"
		},
		{
			"#": "61",
			"$import": "templates/heltun_template.json#relay_button_number_source",
			"label": "Relay 1: Button Number Source",
			"defaultValue": 1
		},
		{
			"#": "66",
			"$if": "firmwareVersion >= 2.4",
			"$import": "~/templates/master_template.json#state_after_power_failure_off_prev",
			"label": "Relay 1: State After Power Failure",
			"defaultValue": 0
		},
		{
			"#": "71",
			"$if": "firmwareVersion < 2.4",
			"$import": "templates/heltun_template.json#relay_timer_mode_duration",
			"label": "Relay 1: Timer Mode Duration"
		},
		{
			"#": "71",
			"$if": "firmwareVersion >= 2.4",
			"$import": "templates/heltun_template.json#relay_timer_mode_duration_new",
			"label": "Relay 1: Timer Mode Duration"
		},
		{
			"#": "101",
			"$import": "templates/heltun_template.json#relay_inverse_mode_inching",
			"label": "Relay Inverse Mode, Inching: Group 1"
		},
		{
			"#": "102",
			"$import": "templates/heltun_template.json#relay_inverse_mode_inching",
			"label": "Relay Inverse Mode, Inching: Group 2"
		},
		{
			"#": "141",
			"$import": "templates/heltun_template.json#report_interval",
			"label": "Energy Consumption Report Interval"
		},
		{
			"#": "142",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Energy Consumption Report",
			"defaultValue": 1
		},
		{
			"#": "143",
			"$import": "templates/heltun_template.json#report_interval",
			"label": "All Sensors: Reporting Interval"
		},
		{
			"#": "144",
			"$import": "~/templates/master_template.json#base_0-100_nounit",
			"label": "Air Temperature Sensor Report Threshold",
			"unit": "0.1 °C",
			"defaultValue": 2
		},
		{
			"#": "145",
			"label": "Humidity Sensor Report Threshold",
			"valueSize": 1,
			"unit": "%",
			"minValue": 0,
			"maxValue": 25,
			"defaultValue": 2
		},
		{
			"#": "146",
			"$import": "~/templates/master_template.json#base_0-99_nounit",
			"label": "Light Sensor Report Threshold",
			"unit": "%",
			"defaultValue": 50
		}
	],
	"compat": {
		// Older firmware versions do not properly support Supervision CC
		"$if": "firmwareVersion < 2.6",
		"commandClasses": {
			"remove": {
				"Supervision": {
					"endpoints": "*"
				}
			}
		}
	}
}