24 lines
2.1 KiB
JSON
24 lines
2.1 KiB
JSON
|
{
|
||
|
|
"manufacturer": "Somfy",
|
||
|
|
"manufacturerId": "0x0047",
|
||
|
|
"label": "SY-IOT101",
|
||
|
|
"description": "Blind-Curtain Motor Controller",
|
||
|
|
"devices": [
|
||
|
|
{
|
||
|
|
"productType": "0x2018",
|
||
|
|
"productId": "0x1805",
|
||
|
|
"zwaveAllianceId": 2472
|
||
|
|
}
|
||
|
|
],
|
||
|
|
"firmwareVersion": {
|
||
|
|
"min": "0.0",
|
||
|
|
"max": "255.255"
|
||
|
|
},
|
||
|
|
"metadata": {
|
||
|
|
"inclusion": "For “Inclusion” in (adding to) a network: Put the Z-Wave™ Interface Controller into “inclusion” mode, and following its instruction to add the SY-IOT101to your controller. To get in the “inclusion” mode.\n - Check if SY-IOT101 module is in exclusion mode.\n- Press the program switch for above 5 second, then, the LED is turned on.\n- Release from the program switch.\n- Then, SY-IOT101 module will try inclusion.\n- If inclusion is succeeded, LED is blinked 3 times.\n- If inclusion is failed, LED is turn off.",
|
||
|
|
"exclusion": "For “Exclusion” removing from the network: Put the Z-Wave™ Interface Controller into “exclusion” mode, and following its instruction to add the SY-IOT101 to your controller. To get in the “exclusion” mode.\n - Check if SY-IOT101 module is in inclusion mode\n- Press the program switch for above 5 second, then the LED is turned on.\n- Release from the program switch. \n- Then, SY-IOT101 module will try inclusion.\n- If inclusion is succeeded, LED is blinked 3 times.\n- If exclusion is failed, LED is turn off.",
|
||
|
|
"reset": "Local Reset (Factory Default Reset )\n- Press the program switch for above 10 second, then the LED is blinked until program switch is released.\n- Release from the program switch.\n- Then, SY-IOT101 module will try local reset.\n- If local reset is succeeded, LED is blinked 5 times.\n- After blinking LED, SY-IOT101 will send the “Device Reset Locally Notification” command and reset to the factory default. \n- If local reset is failed, LED is turn off.\n* Please use this procedure only when the network primary controller is missing or otherwise inoperable.",
|
||
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2472/User_Manual_z-wave%20curtain%20motor%20module_0712R.pdf"
|
||
|
|
}
|
||
|
|
}
|